Omron BP765CAN - Setting the TruRead Mode

10
2. Preparation
2.3 Setting the TruRead
TM
Mode
The TruRead
TM
Mode takes 3 consecutive measurements. The monitor will inflate,
take a measurement, and deflate - 3 times, separated by a short interval between
each measurement. The TruRead
TM
Mode is set “oFF” by default .
1. Select your USER ID (1 or 2).
2. Press the button.
The TruRead
TM
symbol ( ) appears on the display.
3. To set the date and time, proceed to section 2.4.
If the date and time are correct, press the START/STOP button to turn the monitor off.
1)
3)
2)
4)
Press the button to confirm.
If “on” is selected the interval setting appears.
Press or buttons to select “on” or
“oFF”.
Press or buttons to change the interval.
It can be set 15, 30, 60, or 120 seconds.
Press the button to confirm.
The year flashes on the display.
HEM-7311-CACS_C_M.book Page 10 Monday, April 21, 2014 12:10 PM