10
Cleaning and daily disinfecting
Carefully wash your hands before cleaning and disinfecting the nebulizer
SDUWV&OHDQWKHSDUWVDIWHUHDFKXVHWRUHPRYHUHVLGXDOPHGLFDWLRQ7KLV
will prevent inefficient nebulization and reduce risk of infection.
Ɣ&OHDQLQJWKH1HEXOL]HU.LW1DVDOVKRZHU0DVNV0RXWKSLHFHDQG
Adapter:
Fully disassemble the Nebulizer Kit and the Nasal Shower. Wash them
in warm water and mild, neutral detergent. Rinse them thoroughly with
clean hot tap water, gently tap to remove excess water and allow to air
dry in a clean place. It is advisable to replace the Nebulizer Kit and Nasal
Shower after some 100 to 120 treatments or after about 20 boiling cycles.
Ɣ&OHDQLQJWKH&RPSUHVVRUDQG$LU7XEH
Firstly, make sure that the power plug is unplugged from the power outlet.
Wipe clean with a soft cloth moistened with water or mild, neutral deter-
gent.
Ɣ'LVLQIHFWLQJWKH1HEXOL]HU.LW1DVDOVKRZHU0DVNV0RXWKSLHFH
and Adapter:
Always disinfect the parts before using the product for the first time and
after the product has not been used for an extended period of time as
well as after the last treatment of the day. If the parts are heavily stained,
UHSODFHWKHPZLWKQHZRQHV7KH1HEXOL]HU.LW1DVDOVKRZHU0DVNV
Mouthpiece and Adapter can be disinfected by using a chemical disinfec-
tant such as ethanol, sodium hypochlorite (Milton), Quaternary ammo-
QLXP2VYDQ&KORUKH[LGLQH+LELWDQHDQG$PSKRWHULF6XUIDFWDQW7HJR
following product instructions and rinsing off with clean warm water.
Leave to air-dry.
Note: Never clean with benzene, thinner or a flammable chemical.
7KHQRQODWH[HODVWLFEDQGVFDQQRWEHGLVLQIHFWHG5HPRYHWKHP
when disinfecting the masks.
Ɣ%RLOLQJ7KH1HEXOL]HU.LW1DVDOVKRZHU0RXWKSLHFHDQG$GDSWHU
can also be disinfected by boiling between 15 to 20 minutes in plenty of
water. After boiling, carefully remove the parts, shake off excess water
and allow to air-dry in a clean environment.
1RWH'RQRWERLOWKH0DVNDQGWKH$LU7XEH
To Next Page
Loading...
Need help?
General
