103
Appendix A
Standard Models
Masters and Slaves
Name Specifications Model Number
C500 Master All but C200H PCs C500-RM201
C500 Slave --- C500-RT201
C200H Master C200H PCs only
100/120 or 200/240 VAC (switchable) 50/60 Hz
C200H-RM201
C200H Slave 100 to 120V/200 to 240 VAC (switchable) 50/60 Hz C200H-RT201
24 VDC C200H-RT202
C500H Slave Backplane Can only be used for Slave Racks C500-BL061
C500-BL041
Remote Interfaces, I/O Blocks, and Remote Terminals
Name Specifications Model number
Remote Interface Specify 12 VDC or 24 VDC Input G71-IC16
Output G71-OD16
I/O Block Specify 12 VDC or 24 VDC DC input G7TC-ID16
Specify 100 VAC or 200 VAC AC input G7TC-IA16
Specify 12 VDC or 24 VDC. Relay output G7TC-OC16
Remote Terminal Specify 12 VDC or 24 VDC Transistor input G72C-ID16
Transistor output G72C-OD16
Note See
Section 3
for details on pairing Remote Terminals and I/O Blocks.
DIN Rail and Other Accessories
Name Specifications Model Number
DIN Rail Length: 50 cm, Height: 7.3 mm PFP-50N
Length: 1 m, Height: 7.3 mm PFP-100N
Length: 1 m, Height: 16 mm PFP-100N2
End Plate --- PFP-M
Spacer --- PFP-S
Shorting Plate To connect 4 terminals G78-04
I/O Relays
(replacements)
Input
Designate 12 VDC, 24 VDC, 100 VAC, or 200 VAC.
G7T-1122S
Output Designate 12 VDC or 24 VDC. G7T-1112S
Link Adapters
Name Specifications Model Number
Link Adapter Optical (APF/PCF) one connector, RS-485 one connector
For Wired Remote I/O Units only, used in pairs
B500-AL007-P
Remote I/O Unit Connecting Cable
The user can purchase the following recommended RS-485 cable from an independent source.
Remote I/O Unit connecting cable RS-485 VCTF 2-conductor x 0.75 mm (JIS)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...