Omron C200HX-CPU E Series - CX-Programmer

32
2-3-2 CX-Programmer
The CX-Programmer is a Programming Device that runs on Windows. It is used
for full-scale programming operations. Use the following Connecting Cables to
connect the computer running the CX-Programmer with the C200HX/HG/
HE(-Z) PCs.
Connecting Cables for C200HX/HG/HE(-Z) PCs
Unit Unit port Computer Computer
port
Network
type
Model Length Remarks
CPU Unit
Built-in
peripheral
port
IBM PT/AT
or
compatible
D-Sub, 9-pin
male
Peripheral
bus or
SYSWAY
CQM1-CIF02 3.3 m ---
Built-in
RS-232C
port
D-Sub,
9-pin, female
IBM PT/AT
or
compatible
D-Sub, 9-pin
male
SYSWAY
XW2Z-200S-
CV/500S-CV
2 m/5 m ESD (elec-
trostatic dis-
charge)
countermea-
sures
p,
XW2Z-200S-V/
500S-V
2 m/5 m ---
Host Link
Unit (See
note.)
(C200H-
LK201-V1 or
C120-LK201
–V1)
RS-232C
port,
D-Sub,
25-pin
female
IBM PT/AT
or
compatible
D-Sub, 9-pin
male
SYSWAY XW2Z-200P-V/
500P-V
2 m/5 m ---
Communica-
tions Board
RS-232C
port,
D-Sub, 9-pin
female
IBM PT/AT
or
compatible
D-Sub, 9-pin
male
SYSWAY
XW2Z-200S-
CV/500S-CV
2 m/5 m ESD (elec-
trostatic dis-
charge)
countermea-
sures
XW2Z-200S-V/
500S-V
2 m/5 m ---
Note The Host Link Units cannot be used to connect the CX-Programmer to a Z-type
PC (i.e., one with a -Z suffix on the model number).
Peripheral Devices
Section 2-3