Omron CK5M-CPU1 1 Series - Page 52

52
2
Select Controller, then
Communications Setup from
the menu.
Select Connect via Coupler in
the Communications Setup
dialog box, then click the OK
button.
3
Select Controller, then Online
from the menu.
The unit is in online connection
with slave terminals.
4
From the controller selection box
in the Multiview Explorer, select
a Controller Unit.
5
In the edit page for slave
terminals, right-click the
Communications Coupler Unit,
then select Coupler
Connection (USB) – Transfer
to Computer.
Click Configuration
information only or
Configuration information +
Unit operation settings + Unit
application data.