Omron CK5M-CPU1 1 Series - Page 53

53
Output of Coupler I/O Allocations
1
Select Controller, then Offline
from the menu.
2
Double-click EtherCAT under
Configurations and Setup in
the Multiview Explorer.
Right-click on Master, then
select Export All Coupler’s I/O
Allocations.
Changing to DEBUG Mode
1
Select the Safety CPU Unit from
the Controller Selection Box in
the Multiview Explorer.
2
Select Mode – DEBUG Mode
from Controller Menu.
3
The following mode confirmation
Dialog Box is displayed. Click
the Yes Button.