9
Operating instructions
How to use
Warning:
Clean and disinfect the nebulizer kit, mask, mouthpiece or nosepiece before using them
when as follows:
- the first time after purchase.
- if the device has not been used for a long period of time
- if more than one person uses the same device
For the instructions, refer to “Cleaning and disinfecting” section.
1.
Make sure that the power switch is in the off ( ) position.
2.
Connect the AC adapter to the compressor
and plug the power plug into a power outlet.
Note:
Do not place the device in a location where it
is difficult to disconnect the power cord.
3.
Remove the inhalation top together with
vaporizer head from the medication tank.
Note:
If the vaporizer head came off the inhalation top and fell into the medication tank,
remove it out of the tank.
4.
Add the correct amount of prescribed
medication to the medication tank.
To Next Page
Loading...
