PREPARING THE NEBULIZER FOR USE
9
WARNING
Clean and disinfect the nebulizer kit, mouthpiece, and optional nosepiece or masks
before using them for the first time after purchase.
WARNING
If the device has not been used for a long period of time clean and disinfect the
nebulizer kit, mouthpiece, and optional nosepiece or masks before using them.
For directions on cleaning and disinfecting refer to page 16 and page 17.
CAUTION
Make sure the air filter is clean. If the air filter has changed color or has not been
used for 60 days, replace the filter.
For directions on changing the air filter refer to page 19.
1. Turn the power switch off.
Make sure the power switch is in the O position.
2. Plug the power plug into the electrical outlet.
WARNING
Do not plug or unplug the power cord into the electrical
outlet with wet hands.
CAUTION
Do not overload power outlets. Plug the device into the
appropriate voltage outlet.
CAUTION
Do not use extension cords. Plug the power cord directly
into the electrical outlet.
3. Lift up the mouthpiece and the cap to remove them
from the nebulizer kit.
4. Rotate the inhalation top counterclockwise (A) and lift
(B) to remove the inhalation top from the medication cup.
NE-C28- IM Final 6-8-06 6/8/06 2:21 PM Page 8
To Next Page
Loading...
Need help?
General
