OMRON ELECTRONICS LTD ● Technical Support: 0870 752 0871 or visit www.myOMRON.com
24
“NQ-Designer” HMI software installation;
NQ-Designer software is not included within the CX-One software suite installation, but is
included on the Resource CD from the Lean Automation Kit
(see Resource CD > SOFTWARE >
NQ-DESIGNER)
, or can be freely downloaded via www.myOMRON.com You will need to
create a simple user account, requiring just an e–mail address and a password, then go to
Downloads > 4.Products > Software > NQ Designer, where you will find the latest version.
If you download the latest version from www.myOMRON.com, you will need to ‘unzip’ the
compressed download file.
Run the “setup.exe” file and follow the instructions to install NQ-Designer
To Next Page
Loading...
