Omron CP1L-E - Function Block: AreaID and AreaNo for Drive Data

OMRON ELECTRONICS LTD ● Technical Support: 0870 752 0871 or visit www.myOMRON.com
44
JX-MX2 INVERTER REFRESH FUNCTION BLOCK
PNSPO
The ‘AreaID’ and ‘AreaNo’ define
which registers will be used to
hold the command and status
data for each drive (the “I/F or
“Interface” area).
In our program, #82 means “use
DM area” and &100 means “start
at DM100”.
JX-MX2 INVERTER REFRESH FUNCTION BLOCK
PNSPO
DM100
DM101
DM102
DM103
DM104
DM105
DM106
DM107
DM108
DM109
DM110
DM111
DM162
DM163
DM100.00
DM100.01
DM100.02
DM100.03
DM100.04
DM100.05
DM100.08
DM100.09
DM100.10
DM100.13
DM100.14
DM100.15
for Node #01
DM101 = Freq Ref for Node #01