Omron CP1L - Page 5

CPU Units and Expansion Units 5
Note: 1. Cannot be used with a peripheral USB port.
2. CP1L PLCs are supported by CX-Programmer version 7.1 or higher.
Expansion Units
Optional Products, Maintenance Products and DIN Track Accessories
Programming Device
Connecting Cable for
CP1W-CIF01 RS-232C
Option Board
Connects DOS computers, D-Sub 9-pin (Length: 2.0 m) For anti-static
connectors
XW2Z-200S-CV ---
Connects DOS computers, D-Sub 9-pin (Length: 5.0 m) XW2Z-500S-CV
Connects DOS computers, D-Sub 9-pin (Length: 2.0 m) XW2Z-200S-V
Connects DOS computers, D-Sub 9-pin (Length: 5.0 m) XW2Z-500S-V
USB-Serial Conversion
Cable
(See note)
USB-RS-232C Conversion Cable (Length: 0.5 m) and PC driver (on a CD-ROM disc) are
included.
Complies with USB Specification 1.1
On personal computer side: USB (A plug connector, male)
On PLC side: RS-232C (D-sub 9-pin, male)
Driver: Supported by Windows 98, Me, 2000, and XP
CS1W-CIF31
Name Output method Inputs Outputs Model Standards
Expansion I/O
Units
Relay 24 16 CP1W-40EDR N, L, CE
Transistor (sinking) CP1W-40EDT
Transistor output (sourcing) CP1W-40EDT1
Relay --- 32 CP1W-32ER U, C, L, CE
Transistor (sinking) CP1W-32ET
Transistor output (sourcing) CP1W-32ET1
Relay 12 8 CP1W-20EDR1
Transistor (sinking) CP1W-20EDT U, C, N, L, CE
Transistor output (sourcing) CP1W-20EDT1
Relay --- 16 CP1W-16ER CE
--- 8 --- CP1W-8ED U, C, N, L, CE
Relay --- 8 CP1W-8ER
Transistor (sinking) --- 8 CP1W-8ET
Transistor output (sourcing) CP1W-8ET1
Analog Input Unit Analog (resolution: 1/6000) 4 --- CP1W-AD041 UC1, CE
Analog
Output Unit
Analog (resolution: 1/6000) --- 4 CP1W-DA041 UC1, CE
Analog I/O
Unit
Analog (resolution: 1/6000) 2 1 CP1W-MAD11 U, C, N, CE
CompoBus/S
I/O Link Unit
--- 8
(I/O link input bits)
8
(I/O link input bits)
CP1W-SRT21 U, C, N, L, CE
Temperature
Sensor Unit
2 thermocouple inputs CP1W-TS001 U, C, N, L, CE
4 thermocouple inputs CP1W-TS002
2 platinum resistance thermometer inputs CP1W-TS101
4 platinum resistance thermometer inputs CP1W-TS102
Name Specifications Model Standards
Battery Set For CP1L CPU Units
(Use batteries within two years of manufacture.)
CJ1W-BAT01 CE
DIN Track Length: 0.5 m; Height: 7.3 mm PFP-50N ---
Length: 1 m; Height: 7.3 mm PFP-100N
Length: 1 m; Height: 16 mm PFP-100N2
End Plate There are 2 stoppers provided with CPU Units and I/O Interface Units as
standard accessories to secure the Units on the DIN Track.
PFP-M
Name Specifications Model Standards