Omron CS1G-CPU42H - Reading Data from C200 H

11
4. Reading data from C200H
Load the ladder program and Data Memory from C200H using the CX-Programmer.
Required items
Support Software
(PC)
CX-One
(CXONE-AL□□C-V□, CXONE-AL□□D-V□)
or
CX-Programmer (WS02-CXPC□-V□)
Peripheral Interface Unit and
Connecting Cable
C200H-IP007 and CQM1-CIF02
or
C120-LK201-V1 and XW2Z-200P-V
C200H
PC
CX
-Programmer
Connecting Cable
CQM1-CIF02 (or XW2Z-200P-V)
Peripheral Interface Unit
C200H-IP007 (or C120-LK201-V1)
(1) Mount the Peripheral Interface Unit to C200H and connect it with a PC.
(2) Start up the CX-Programmer. (Select All Program - OMRON - CX-One - CX-Programmer - CX-Programmer
from the Windows Start Menu.)
(3) Select C200H for the Device Type. (Select New from the File Menu to display the below dialog box.)