Omron E3C-LD11 - Sensor Heads: E3 NC-L Compact Laser Sensor Series; Amplifier Units: E3 NC-L Compact Laser Sensor Series; Sensor Heads: E3 NC-S Ultra-compact CMOS Laser Sensor Series

E3NC
2
Ordering Information
Sensor Heads: E3NC-L Compact Laser Sensor Series (Dimensions ➜ page 17)
* These values apply when an E39-R21, E39-R22, E39-RS10, or E39-RS11 Reflector is used. A Reflector is not included. Purchase a Reflector separately to match
the intended use of the Sensor.
Note: Only an E3NC-LA@@ Amplifier Unit can be connected.
Amplifier Units: E3NC-L Compact Laser Sensor Series (Dimensions ➜ page 19)
* A Sensor Communications Unit is required if you want to use the Amplifier Unit on a network.
Note: Only an E3NC-LH@@ Sensor Head can be connected.
Sensor Heads: E3NC-S Ultra-compact CMOS Laser Sensor Series (Dimensions ➜ page 18)
Note: Only an E3NC-SA@@ Amplifier Unit can be connected.
Sensing
method
Appearance Beam shape Sensing distance
Laser
class
Cable length Model
Coaxial Retro-
reflective with
MSR function
Spot
Class 1
2 m E3NC-LH03 2M
5 m E3NC-LH03 5M
Diffuse-
reflective
Variable spot
2 m E3NC-LH02 2M
5 m E3NC-LH02 5M
Limited-
reflective
Spot
2 m E3NC-LH01 2M
5 m E3NC-LH01 5M
Connecting method Appearance Inputs/outputs
Model
NPN output PNP output
Pre-wired (2 m) 2 outputs + 1 input E3NC-LA21 2M E3NC-LA51 2M
Wire-saving Connector 1 output + 1 input E3NC-LA7 E3NC-LA9
M8 Connector 1 output + 1 input E3NC-LA24 E3NC-LA54
Connector for Sensor
Communications Unit *
--- E3NC-LA0
Sensing
method
Appearance Beam shape Measurement range
Laser
class
Cable length Model
Distance-
settable
Spot
Class 2 2 m E3NC-SH250H 2M
Class 1
2 m E3NC-SH250 2M
2 m E3NC-SH100 2M
8 m
*
1.2 m
70±15 mm
35 to 250 mm
35 to 100 mm