EasyManua.ls Logo

Omron E3JK

Omron E3JK
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
E3JK
1E3JK
All voltage photoelectric sensors
E3JK
Built-in amplifier accepts wide supply
voltage range.
Slim, space-saving construction mea-
sures only 50 x 50 x 17.4 mm.
Relay outputs with long life expectan-
cy and high switching capacity (3 A,
250 V AC).
Polarized retroreflective type available
for glossy or shiny object detection.
* The value within the parentheses indicates the sensing distance applied when the E39-R2 reflector is used.
Note: The UL-listed model ends with "-US". (Example: E3JK-5M1-US). Note that the DC transistor type of the E3JK is UL-unlisted.
Accessories (Order Separately)
Slits
Reflectors
* Values in parentheses indicate the minimum required distance between the sensor and reflector.
Note: When the reflector used is other than the supplied one, set the sensing distance to about 0.7 times of the typical example as a guideline.
Sensor type Shape
Connection
method
Sensing distance Output form Output Model
Through-beam
Pre-wired
models
Light ON
Relay output
E3JK-5M1
Dark ON E3JK-5M2
Retroreflective
model (with
M.S.R. function)
*
Light ON
Relay output
E3JK-R2M1
Dark ON E3JK-R2M2
Light ON/Dark ON
(selectable)
DC transistor
output
NPN E3JK-R2S3
PNP E3JK-R2R3
Retroreflective
model (without
M.S.R. function)
*
Light ON
Relay output
E3JK-R4M1
Dark ON E3JK-R4M2
Light ON/Dark ON
(selectable)
DC transistor output
(NPN)
E3JK-R4S3
Diffuse-reflective
Light ON
Relay output
E3JK-DS30M1
Dark ON E3JK-DS30M2
Light ON/Dark ON
(selectable)
DC transistor output
(NPN)
E3JK-DS30S3
5m
2.5m
(3m)
4m
(5m)
300mm
Slit width Sensing distance
Minimum sensing
object (typical)
Model Quantity Remarks
Width 1 mmx20 mm E3JK-5
##
0.7 m 1 mm dia. E39-S39
1 pc. each for emitter
and receiver
(total 2 pcs.)
(Seal type long slit)
Can be used with the through-
beam model E3JK-5##.
Name Sensing distance (typical) Model Quantity Remarks
Reflectors
E3JK-R2## 2.5 m (rated value)
E39-R1 1
Attached to the E3JK-R2##.
Attached to the E3JK-R4##.
E3JK-R4## 4 m (rated value)
E3JK-R2## 3 m
E39-R2 1 ---
E3JK-R4## 5 m
Small reflector E3JK-R2## 1 m (5 mm) * E39-R3 1 ---
Tape Reflector
E3JK-R2##
750 mm (200 mm) *
E39-RS1
1 The M.S.R. function is available.E3JK-R2## 1.2 m (200 mm) * E39-RS2
E3JK-R2## 1.5 m (200 mm) * E39-RS3
Question and Answer IconNeed help?

Do you have a question about the Omron E3JK and is the answer not in the manual?

Omron E3JK Specifications

General IconGeneral
Light SourceInfrared LED
Response Time30 ms max.
Operating Temperature-25 to 55°C
Protection DegreeIP64
Housing MaterialABS
Sensing MethodThrough-beam
Power Supply Voltage12 to 240 VDC/24 to 240 VAC
Output TypeRelay
Output Current3 A at 250 VAC
Connection TypeCable or Connector

Summary

Accessories

Slits

Accessory for slit width and sensing distance specification.

Reflectors

Various types of reflectors for retroreflective sensor models.

Mounting Brackets

RatingPerformance

Characteristic Data

Output Circuit Diagram

Operation

Adjustment

Guides for setting the sensor's sensitivity and operational range.

Precautions

Correct Use

Recommendations for proper sensor application and power reset time.

Wiring Considerations

Notes on connecting DC transistor output types and load current limits.

Ambient Conditions

Information on environmental factors that may affect sensor performance.

Dimensions

Related product manuals