Omron E3Z-LT - Page 11

E3Z-LT/LR/LL
Dimensions (Unit: mm)
Sensors
Through-beam
Pre-wired Models
E3Z-LT61
E3Z-LT81
20
8
17
2.1
25.4
Two, M3
31
10.410.8
Optical axis
Power indicator (orange)
Lens
Emitter
4-dia. vinyl-insulated round cable with 2
conductors (Conductor cross section:
0.2 mm
2
(AWG24), Insulator diameter: 1.1 mm),
Standard length: 2 m
15.5
8
18
3.5 dia.
Pins 2 and 4 are not
used.
Termi-
nal No.
Specifi-
cations
1+V
2 ---
30 V
4 ---
15
5.9
15.6
4
3
2
1
M12×1
1
3
2
4
M8
24
1
3
*4-dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 0.3 m
M8 3-pin Pre-wired Connector
(Ask your OMRON representative for details.)
M8×1
4
3
1
Press-fit e-CON Pre-wired Connector
(Ask your OMRON
representative for
details.)
*4-dia. vinyl-insulated
round cable with
2 or 3 conductors,
Standard len
g
th: 0.3 m, 2 m
*4-dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 0.3 m
M12 Pre-wired Connector
(E3Z-LT@@-M1J)
M8 Pre-wired Connector
(Ask your OMRON representative for details.)
*4-dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 0.3 m
* The Emitter cable has two conductors and the
Receiver cable has three conductors.
17
2.1
25.4
Two, M3
31
15.5
11
18
20
12.45
8.8
3.2
10.410.8
4.3
7.2
Optical axis
Stability indicator (green)
Operation indicator (orange)
Sensitivity adjuster
Operation selecto
r
Lens
Receiver
V4-dia. vinyl-insulated round cable with
3 conductors (Conductor cross section: 0.2 mm
2
(AWG24), Insulator diameter: 1.1 mm),
Standard length: 2m
Pin 2 is not used.
Termi-
nal No.
Specifi-
cations
1+V
2 ---
30 V
4 Output
Through-beam
Standard Connector
Models
E3Z-LT66
E3Z-LT86
17
2.1
25.431
10.4
Two,
M3
20
8
10.410.8
9.75
M8 connecto
r
Lens
Optical axis
Power indicator (orange)
Emitter
15.5
8
18
3.5 dia.
17
2.1
25.4
9.75
31
10.4
15.5
11
18
20
12.45
8.8
3.2
10.410.8
4.3
7.2
Two,
M3
M8 connector
Lens
Optical axis
Stability indicator (green)
Operation indicator (orange)
Sensitivity adjuster
Receiver
Operation selector
http://www.ia.omron.com/
11
(c)Copyright OMRON Corporation 2007 All Rights Reserved.