To Next PageTo Next Page
Need help?Do you have a question about the Omron E3Z series and is the answer not in the manual?
General| Protection Rating | IP67 |
|---|---|
| Response Time | 1 ms or less |
| Accessory Type | Photoelectric Sensor |
| Connection Type | Pre-wired, Connector |
| Sensing Method | Through-beam, Retro-reflective, Diffuse-reflective |
| Light Source | Infrared LED, Red LED |
| Power Supply Voltage | 12 to 24 VDC |
| Output Type | NPN, PNP |
| Operating Temperature | -25 to 55°C |
| Sensing Distance | varies by model (up to 30m for Through-beam) |
Highlights performance aspects like sensing distance and model types.
Focuses on high protection against water, dust, and electrical interference.
Explains stable detection regardless of object color or reflectivity using BGS/FGS.
Details energy-saving aspects and eco-friendly packaging and materials.
Describes detection of tiny objects (0.1 mm) with a 2.5 mm spot and thin beam.
Highlights stable detection of PET bottles using OMRON's unique optical system.
Mentions ease of use due to fork design and suitability for limit of travel monitoring.
Shows examples of detecting cosmetic product covers, pastries, and chewing gum.
Illustrates checking for straws and determining front/back or orientation of floppy disks.
Demonstrates detection of PET bottles and films/glass plates.
Shows application in automated warehouse conveyor passage inspection.
Lists sensor types, shapes, connection methods, sensing distances, and model numbers.
Details available accessories like slits with specifications and models.
Lists various reflector models, sensing distances, and suitability for E3Z-B models.
Explains how to prevent mutual interference between through-beam sensors.
Presents different mounting brackets for installation and adjustment.
Details wire colors, cable types, shapes, lengths, and model numbers for connectors.
Lists performance specs like sensing distance, power, and output for through-beam models.
Details performance specs like sensing distance, power, and output for retro-reflective models.
Lists performance specs for diffuse-reflective wide-beam sensors.
Lists performance specs for diffuse-reflective standard-beam sensors.
Provides performance specs for diffuse-reflective narrow-beam sensors.
Lists performance specifications for distance-settable sensor models.
Details performance specs for retro-reflective PET bottle sensors.
Lists performance specifications for grooved-type standard-beam sensors.
Provides performance specs for grooved-type wide-beam sensors.
Summarizes vibration, shock resistance, protective structure, and connection for through-beam.
Summarizes vibration, shock resistance, protective structure, and connection for retroreflective models.
Summarizes vibration, shock resistance, protective structure, and connection for wide-beam diffuse-reflective.
Summarizes vibration, shock resistance, protective structure, and connection for standard-beam diffuse-reflective.
Lists performance specs like vibration, shock, protection, and connection for narrow-beam diffuse-reflective.
Details vibration, shock, protection, and connection for distance-settable models.
Summarizes vibration, shock resistance, protective structure, and connection for PET bottle retro-reflective.
Lists performance specs like vibration, shock, protection, and connection for grooved-type models.
Shows operating range graphs for the narrow-beam E3Z-L model.
Presents operating range graphs for transparent object retroreflective models.
Displays operating range graphs for distance-setting E3Z-LS models.
Provides graphs showing excess gain versus distance for through-beam models.
Shows excess gain ratio graphs for diffuse-reflective E3Z-D models.
Presents excess gain graphs for narrow-beam E3Z-L models.
Displays receiver output graphs for transparent object retroreflective models.
Shows distance versus sensing object size graphs for diffuse-reflective models.
Provides distance versus sensing object size graphs for narrow-beam models.
Graphs showing spot diameter variation with distance/object size.
Graphs illustrating differential travel and hysteresis against distance/object size.
Plots showing sensing distance change rate vs. object size due to inclination.
Bar chart presenting sensing distance based on material and set distance.
Graph of sensing range vs. set distance for white and black paper in FGS mode.
Bar chart showing sensing distance for various materials at 40mm and 200mm set distance.
Diagrams and timing charts for NPN output models.
Shows the circuit diagram for the through-beam emitter.
Circuit diagrams for receivers and retroreflective/diffuse models.
Illustrates pin configurations for various models.
Diagrams and timing charts for PNP output models.
Circuit diagram for the through-beam emitter (PNP).
Circuit diagrams for receivers and retroreflective/diffuse models (PNP).
Illustrates pin configurations for various models (PNP).
Shows wire colors, connector pin assignments, and applications for DC connectors.
Identifies sensor models by type: Through-beam, Diffuse-reflective, Retro-reflective, Distance-setting.
Details slit mounting and BGS/FGS operational modes for E3Z-LS.
Warns against AC power, short-circuiting loads, and connecting without a load.
Advises against use in locations with explosive or flammable gas.
Covers power reset time and avoiding sensor malfunctions with inverters.
Guides on face-to-face mounting, exposure to light, and avoiding impact damage.
Advises on sensor mounting, adjustment, and cleaning best practices.
Explains the operation indicators for BGS and FGS modes.
Notes potential detection issues with bottle shapes and need for verification.
Shows dimensions and connection details for pre-wired through-beam models.
Displays dimensions and connection details for connector-type through-beam models.
Details dimensions and connection specs for retroreflective models.
Shows dimensions and connection details for diffuse-reflective models.
Displays dimensions and connection details for distance-settable models.
Shows dimensions and connection details for distance-settable and grooved-type models.
Lists slit models, dimensions, and materials.
