Omron E3Z series

A-47E3Z
E3Z
Ordering Information
Sensors
Accessories (Order Separately)
Slits
Sensor type Shape Connection method Sensing distance
Model
NPN output PNP output
Through-beam
Pre-wired models
(2 m)*1
*1. Models provided with a 0.5-m cable are available. When ordering, specify the cable length by adding the code "0.5M" to the model number (e.g., E3Z-T61 0.5M).
E3Z-T62 E3Z-T82
E3Z-T62-G0*2
*2. With „Emission Stop“ feature. Can be used to force a state change at the receiver (Sensor function test).
E3Z-T82-G0
Connector type
E3Z-T67 E3Z-T87
E3Z-T67-G0 E3Z-T87-G0
Pre-wired models
(2 m)*1
E3Z-T61 E3Z-T81
Connector type
E3Z-T66 E3Z-T86
Pre-wired models
(2 m)*1
E3Z-T61A
E3Z-T81A
Connector type
E3Z-T66A
E3Z-T86A
Retroreflective
model (with M.S.R.
function)
*3
*3. Not attached. Please purchase the optional reflector (9 types) according to your application.
Pre-wired (2 m)*1 E3Z-R61 E3Z-R81
Connector type *4
*4. The sensing distance specified is possible when the E39-R1S used. Figure in parentheses indicate the minimum required distance between the Sensor and Re-
flector.
E3Z-R66 E3Z-R86
Diffuse-reflective
Pre-wired models
(2 m)*1
E3Z-D61 E3Z-D81
Connector type
E3Z-D66 E3Z-D86
Pre-wired models
(2 m)*1, *5
*5. The connector joint type is available M12. Its model ends with -M1. (Example: E3Z-T61-M1J)
E3Z-D62 E3Z-D82
Connector type
E3Z-D67 E3Z-D87
Thin beam type
reflective model
Pre-wired models
(2 m)*1
E3Z-L61 E3Z-L81
Connector type E3Z-L66 E3Z-L86
Distance-settable
Pre-wired models
(2 m)*1
E3Z-LS61 E3Z-LS81
Connector type E3Z-LS66 E3Z-LS86
Transparent PET
bottle type Retro- re-
flective model (with-
out M.S.R. function)
*3
Pre-wired (2 m) *1 *4 E3Z-B61 E3Z-B81
Connector type E3Z-B66 E3Z-B86
Pre-wired models
(2 m)
*1
*4
E3Z-B62 E3Z-B82
Connector type E3Z-B67 E3Z-B87
Grooved type
through-beam
model
1
Pre-wired models
(2 m)
*1
E3Z-G61 E3Z-G81
2 E3Z-G62 E3Z-G82
1
Junction connector
E3Z-G61-M3J E3Z-G81-M3J
2 E3Z-G62-M3J E3Z-G82-M3J
Slit width
Sensing distance (typical)
Minimum sensing object (typical) Model Quantity
E3Z-T## E3Z-T##A
0.5 mm dia.
50 mm 35 mm
0.2 mm dia. E39-S65A
One set (contains slits for both
the emitter and receiver)
1-mm dia.
200 mm 150 mm
0.4 mm dia. E39-S65B
2-mm dia.
800 mm 550 mm
0.7 mm dia. E39-S65C
0.5 x 10 mm
1 m 700 mm
0.2 mm dia. E39-S65D
1 x 10 mm
2.2 m 1.5 m
0.5 mm dia. E39-S65E
2 x 10 mm
5 m 3.5 m
0.8 mm dia. E39-S65F
Red light Infrared light
30m
15m
10m
4m
[100mm]
5 to 100 mm (wide view)
1m
90±30mm
40 mm20 mm 200 mm
BGS (at min. setting)
BGS (at max. setting)
FGS (at max. setting)
FGS (at min. setting)
Incident
light level
threshold (fixed)
500mm [80mm]
2m [100mm]
25mm
F502-EN2-04.book Seite 47 Dienstag, 26. Juli 2005 5:48 17