Omron E3Z-LT - Page 3

E3Z-LT/LR/LL
Mounting Brackets
Note: When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
* Cannot be used for Standard Connector models.
Sensor I/O Connectors
Appear-
ance
Model Quantity Remarks
Appear-
ance
Model Quantity Remarks
E39-L153 1
Mounting Brackets
E39-L98 1 Metal Protective Cover Bracket *
E39-L104 1 E39-L150 1 set
(Sensor adjuster)
Easily mounted to the aluminum
frame rails of conveyors and
easily adjusted.
For left to right adjustment
E39-L43 1 Horizontal Mounting Bracket *
E39-L151 1 set
E39-L142 1
Horizontal Protective Cover
Bracket *
E39-L44 1 Rear Mounting Bracket E39-L144 1
Compact Protective Cover
Bracket (For E3Z only) *
Size Cable Appearance Cable type Model
M8
Standard
2 m
4-wire
XS3F-M421-402-A
5 m XS3F-M421-405-A
2 m XS3F-M422-402-A
5 m XS3F-M422-405-A
M12
(For -M1J
models)
2 m
3-wire
XS2F-D421-DC0-A
5 m XS2F-D421-GC0-A
2 m XS2F-D422-DC0-A
5 m XS2F-D422-GC0-A
e-CON
2 m
4-wire
E39-ECON2M
5 m E39-ECON5M
0.5 to 1 m E39-ECONW@M
1.1 to 1.5 m
Replace the box (@) in the model number
by the cable length in increments of 0.1 m.
1.6 to 2 m
Straight
L-shaped
Straight
L-shaped
1234
Connector on One End
1234
4
3
1
2
Connectors of Both Ends
http://www.ia.omron.com/
3
(c)Copyright OMRON Corporation 2007 All Rights Reserved.