Omron E5CS-R1KJX-F - User Manual

R
37
Temperature Controller
E5CS-X
1/16 DIN Sized Controller Offers
Selectable Control, Alarm Modes
H
Accurate to ±0.5% of full scale
H Multiple temperature scale ranges allow
flexibility to match application
H Field-selectable temperature ranges in
°F and °C
H Selectable ON/OFF and PID control
with auto-tuning of proportional band
H 8-function alarm, standard
H Tamper-proof setting, faulty sensor
compensation and controller diagnostics
H Easy-to-read 11 mm high LED display
H Nonvolatile memory backup
H 3-year warranty
RC
Ordering Information
J TEMPERATURE CONTROLLERS
Item Part number
Sensor input type Thermocouple
(Types J and K)
Platinum RTD (Pt: 100 Ω,
DIN and JIS standards)
Interchangeable thermistor
(THE types)
Output
Contact E5CS-R1KJX-F E5CS-R1PX-F E5CS-R1GX-F
Voltage E5CS-Q1KJX-F E5CS-Q1PX-F E5CS-Q1GX-F
Temperature Ranges
Thermocouple Input Type
Input type
Type K Type J
Temperature range 0 to 200 0 to 300 0 to 400 0 to 500 0 to 600 0 to 999 0 to 999 0 to 200 0 to 300 0 to 400 0 t0 500
Scale indication °C °C °C/°F °C/°F °C/°F °C/°F °F °C °C °C/°F °C/°F
Unit of measure 1° C or F
Platinum RTD Input Type
Temperature range
–50 to 50 0.0 to 50.0 –20 to 80 0.0 to 99.9 0 to 200 0 to 300 0 to 400 0 to 600 0 to 800
Scale indication °C °C °C °C/°F °C/°F °C °C/°F °F °F
Unit of measure 1° C or F 0.1° C or F 1° C or F 0.1° C or F 1° C or F
Thermistor Input Type
Temp. range
–50 to 50 0 to 100 50 to 150 100 to 200 150 to 300 –50 to 100 0 to 200 100 to 300 200 to 400 300 to 600
Scale indication °C °F
Unit of measure 1° C or F

Omron E5CS-R1KJX-F Specifications

General

Model	E5CS-R1KJX-F
Type	Temperature Controller
Size	48 x 48 mm
Number of Control Outputs	1
Ambient Operating Temperature	0 to 55 °C
Input Type	Thermocouple, RTD
Output Type	Relay, Voltage
Power Supply	100 to 240 VAC
Control Method	ON/OFF, PID
Control Output	Relay
Storage Temperature	-25 to 65°C
Relative Humidity	25% to 85%
Protection Rating	IP66
Mounting	Panel Mounting
Dimensions	48 x 48 x 78 mm
Power Consumption	5 VA max

Summary

Ordering Information

Specifications

Connections

Operation

Settings Before Power Application

Details initial setup steps, including setting temperature range, function, and alarm modes.

Internal Switches and Selectors

Explains how to access and use internal switches for setting temperature ranges and alarm modes.

FUNCTION SELECTOR SWITCH

Control Mode Selection

Details how to select between ON/OFF and PID control modes using the function selector switch.

ON;OFF and PID Action Settings

Explains settings for ON/OFF action and PID action, including proportional period.

Determining Control Output Operation

Control Output Modes

Auto-tuning Proportional Band

SELECTING A SCALE RANGE

SELECTING ALARM MODES

Alarm Mode Functions

Precautions and Failure Indication

Sensor Failure and Error Messages

Explains error messages like FFF, E11, E33 and their causes, including sensor failure indications.

Sensor Failure Indication

Installation and Connections

Mounting and Removal

Provides instructions for mounting the controller into a panel and removing the adapter.

Connection Examples and Terminals

Shows examples of terminal connections using M3.5 solderless terminals and lead wire preparation.