What to do if Omron E5CSL displays s.err (S.ERR)?
If your Omron Temperature Controller displays 's.err', check the wiring of the inputs for any disconnections or short circuits, and also verify the input type.
What to do if my Omron E5CSL shows e111 (E111) error?
If your Omron Temperature Controller displays the error code 'e111', cycle the power by turning it OFF and then back ON again.
General| Dimensions | 48 x 48 x 78 mm |
|---|---|
| Display Type | 7-segment digital display |
| Mounting Method | Panel mounting |
| Number of Control Outputs | 1 |
| Number of Alarms | 1 |
| Protection Rating | IP20 |
| Control Type | PID |
| Input Type | Thermocouple, RTD |
| Supply Voltage | 100 to 240 VAC |
| Output Type | Relay, Voltage |
| Control Method | PID |
| Ambient Operating Temperature | -10 to 55°C |
Explains the structure and components of the product's model number.
Lists optional accessories such as terminal covers, front panels, and adapters.
Provides detailed technical specifications including ratings, sensor inputs, and output types.
Details the different alarm types and their configurations.
Details key product characteristics including accuracy, influence of temperature, and standards.
Identifies and explains the various components and controls of the E5CSL/E5CWL.
Provides physical dimensions, panel cutout details, and mounting instructions.
Outlines critical safety measures and guidelines for proper product usage.
Details on service life, measurement accuracy, waterproofing, and operating guidelines.
Provides guidance on panel mounting, terminal cover installation, and wiring best practices.
Outlines OMRON's warranty terms and limitations of liability for the product.
Discusses product suitability for specific applications and user responsibilities.
Includes performance data disclaimers and notes on specification changes.
To Next Page
