Omron E9NC-TA Series - Minute Adjustment of Threshold Level; Measuring a Work with ± tolerance; Measuring for one reference; Measuring for standard Work as reference

Output switching
Do not use this product under ambient conditions that exceed the ratings.
Lay the product cable away from any high-voltage cable or power line. If laid in the same conduit or duct,
induction noise from them may cause malfunction or breakdown of the product.
Do not short the load. Explosion or burring may result.
Do not use the Sensor in water, rainfall, or outdoors.
30
■Applicable standards
・EN61326-1
・Electromagnetic environment : Industrial electromagnetic environment (EN/IEC61326-1 Table 2)
Attention must be paid during operation or cleaning.
ThefollowingnoticeappliesonlytoproductsthatcarrytheCEmark：
Notice：
ThisisaclassAproduct.Inresidentialareasitmaycauseradio
Interference，inwhichcasetheusermayberequiredtotakeadequate
measurestoreduceinterference.
The Amplifier Unit uses the EEPROM memory to store the configuration information. When the memory is
written to more than 10,000 times, a memory error appears and the Amplifier Unit needs to be replaced. The
memory data will be rewritten by performing a preset, threshold change, or tuning.
* 9 5 2 3 1 1 9 - 0 F *