To Next PageTo Next Page
Need help?Do you have a question about the Omron E3X-HD Series and is the answer not in the manual?
General| Model | E3X-HD Series |
|---|---|
| Category | Amplifier |
| Type | Fiber Amplifier |
| Ripple (p-p) | 10% max. |
| Current Consumption | 40 mA max. |
| Light Source | Red LED (650 nm) |
| Output Current | 100 mA max. |
| Housing Material | ABS |
| Detection Method | Retro-reflective, Diffuse-reflective |
| Output Type | NPN/PNP |
| Protection Circuit | Reverse polarity protection |
| Ambient Temperature | -25 to 55°C (with no icing or condensation) |
| Ambient Humidity | 35 to 85% RH (with no condensation) |
| Vibration Resistance | 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions for 2 hours each |
| Connection Method | Connector |
| Storage Temperature | -30 to 70°C (with no icing or condensation) |
| Weight | Approx. 100 g |
Automatic optimal settings via Smart Tuning and stable detection with Smart Power Control.
Detailed electrical and environmental specifications for standard models.
Sensing distances for various threaded fiber sensor models.
Sensing distances for cylindrical fiber sensor models.
Input/Output circuit diagrams for NPN and PNP models.
Essential warnings on electrical safety and product handling.
Procedures for correct application and operational safety.
Steps for mounting and removing units on DIN tracks.
