A Using Relays
• When actually using Relays, unanticipated failures may occur. It is
therefore essential to test the operation is as wide of range as
possible.
• Unless otherwise specified in this catalog for a particular rating or
performance value, all values are based on JIS C5442 standard
test conditions (temperature: 15 to 35°C, relative humidity: 25% to
75%, air pressure: 86 to 106 kPa). When checking operation in the
actual application, do not merely test the Relay under the load
conditions, but test it under the same conditions as in the actual
operating environment and using the actual operating conditions.
• The reference data provided in this catalog represent actual
measured values taken from samples of the production line and
shown in diagrams. They are reference values only.
• Ratings and performance values given in this catalog are for
individual tests and do not indicate ratings or performance values
under composite conditions.
D Operating and Storage
Environments
1
2
3
4
5
6
7
8
Operating, Storage, and Transport
Operating Atmosphere
Using Relays in an Atmosphere Containing Corrosive Gas (Silicon, Sulfuric, or Organic Gas)
Adhesion of Water, Chemicals, Solvent, and Oil
Vibration and Shock
External Magnetic Fields
External Loads
Adhesion of Magnetic Dust
C-9
E Relay
Mounting
Operations
A Plug-in Relays 1
2
3
Panel-mounting Sockets
Relay Removal Direction
Terminal Soldering
C-10
B Printed Circuit
Board Relays
1 Ultrasonic Cleaning
C Common Items 1
2
3
4
Removing the Case and Cutting Terminals
Deformed Terminals
Replacing Relays and Performing Wiring Operations
Coating and Packing
F Handling Relays 1
2
Vibration and Shock
Dropped Products
C-11
G Relays for Printed Circuit Boards
(PCBs)
1
2
3
4
5
6
7
8
9
10
Selecting PCBs, (1) PCB Materials
Selecting PCBs, (2) PCB Thickness
Selecting PCBs, (3) Terminal Hole and Land Diameters
Mounting Space
A Ambient Temperature
B Mutual Magnetic Interference
Pattern Design for Noise Countermeasures
A Noise from Coils
B Noise from Contacts
C High-frequency Patterns
Shape of Lands
Pattern Conductor Width and Thickness
Conductor Pitch
Securing the PCB
Automatic Mounting of PCB Relays
C-11
H Troubleshooting C-15
No. Area No. Classification No. Item Page
http://www.ia.omron.com/
C-3
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
