Cam Positioner
H8PS
C-169
Counters
■
Initializing
■
Actual Setting Example
1. Setting the Origin
Any mode can be used to set the origin except for the Run Mode.
Ex. Set the process value of 180
°
to 0
°
.
a. Set the mode switch to PRGM.
b. Set the programming mode switch to TCH.
c. Adjust the machine (Encoder) to the position of the desired origin
(180
°
in the example).
d. Press the ORIGIN Key.
FAST: 60 to 330 min
−1
SLOW: 60 min
−1
max.
Set the rotation speed of the Encoder.
Mode Programming Mode
PRGM
Initial Display
To Next Page
Loading...
