Omron 3F88L-160 - User Manual

Other manuals for Omron 3F88L-160

Questions and Answers

Sheila DunnAug 9, 2025

What to do if nothing appears on the Omron 3F88L-160 Valve Positioners display and the ERROR terminal is H?

A
Amber KingAug 9, 2025
If nothing appears on the Omron Valve Positioners display and the ERROR terminal is H, it could be due to a power supply error. Ensure the correct power supply voltage is supplied. Another cause might be that a RESET signal has been input; in this case, check the connected wiring. A circuit error could also be the reason, requiring you to replace the Cam Positioner. It may also be due to Watchdog timer error.

Richard CooperAug 25, 2025

What to do if nothing appears on the Omron Valve Positioners display and the ERROR terminal is L?

R
Richard HernandezAug 25, 2025
If nothing appears on the Omron Valve Positioners display and the ERROR terminal is L, this could indicate a display circuit error. The suggested solution is to replace the Cam Positioner.

General