Omron 3F88L-160 - Selecting the Output Device

2-4
2-1-2 Selecting the Output Device
Select the device and connection method for ON/OFF outputs from the Cam Positioner. (Refer to 2-3
Wiring for information on connecting output devices.)
H For Relay Output
Use an I/O Block for relay output.
3F88L-160 or 3F88L-162
Cam Positioner
3F88L-CGjjjN
Cam Output Cable
G7TC-OC16
I/O Block
H For Transistor (Open Collector) Output
Use the outputs straight from the Cam Output Cable.
3F88L-160 or 3F88L-162
Cam Positioner
3F88L-CGjjjS
Cam Output Cable
Open collector output
H For Mostly Relay Output with Some Open Collector Output
Use an I/O Block and use an Output Short-circuit Module to give some open collector output.
3F88L-160 or 3F88L-162
Cam Positioner
3F88L-CGjjjN
Cam Output Cable
G7TC-OC16
I/O Block
Output
Short-circuit
Module
Design Chapter 2