1-9
1-3-3 Operation Keys
Name Mode Function
BANK/
FUN
Bank/Function Key PRGM/SET Increases bank and function numbers.
CAM/
PRMTR
Cam/Parameter Key --- Increases cam and parameter numbers.
ON/
OFF
ON/OFF Switching Key --- Switches between ON and OFF angles.
Up Key --- Increases the numeral that is flashing.
Down Key --- Decreases the numeral that is flashing.
Forward Key --- Changes the digit of the numeral to be set.
CLR
Clear Key --- Clears data.
SET
Set Key --- Saves input data.
1-3-4 Terminal Block and Connectors
Name Function
10. Resolver connector Connects to the Resolver cable connector.
11. Cam output connector Used for cam output.
12. Communications port CompoWay/F communications connector (connects to a personal computer
and other Cam Positioners) (9-pin D-sub connector)
13. Terminal block Power input, control input, and control output terminals.
Outline Chapter 1
To Next Page
Loading...
