13
HOW TO USE THE MEMORY FUNCTION
This monitor has a memory capable of storing fourteen (14) sets of
readings. Every time you complete the measurement, the monitor
automatically stores the blood pressure reading and pulse rate.
• Push the MEMORY button to recall stored readings while the
Heart Symbol ( ) is displayed.
• To delete all stored readings, press and hold the MEMORY button, then
press START button for 2 seconds. All the readings will be deleted.
NOTE: You can not delete the stored readings partially.
• When fourteen (14) sets of readings are stored in memory, the oldest
set will be deleted to store a new set.
To Next Page
Loading...
