Omron INTELLI SENSE HEM-711AC - Resetting the Date and Time

RESETTING THE DATE AND TIME
To adjust the date or time after it has been setup when you first use the
unit:
Start with the monitor in the off position.
1. Press and hold the Date/Time
Setting button.
The year flashes on the display.
2. Follow the instruction from step 2 on page 18.
NOTE: If you need to change the Date and Time,
always adjust the Date and Time setting before taking
the next measurement.
SETTING THE DATE AND TIME
20
STOP
280239_HEM-7011-E_S.qxd 2/19/08 3:00 PM Page 20