Omron M7 Intelli IT User Manual (English)

Questions and Answers:

J
Jill SmithSep 10, 2025
Why is the Bluetooth symbol flashing on my Omron Blood Pressure Monitor?
- M
  Mark LoweSep 10, 2025
  If the Bluetooth symbol is flashing on your Omron Blood Pressure Monitor, it means one of the following: * The monitor is waiting to pair with your smart device. Refer to the instruction manual section on pairing, or press the [START/STOP] button to cancel pairing and turn off the monitor. * The monitor is ready to transfer readings to your smart device. Open the “OMRON connect” app to transfer your readings. * More than 80 readings haven't been transferred. Pair or transfer readings to the “OMRON connect” app to clear the error symbol and keep them in the app's memory.
S
sjuarezAug 25, 2025
Why Omron M7 Intelli IT Blood Pressure Monitor arm cuff does not inflate?
- E
  Eric PatrickAug 25, 2025
  If the arm cuff of your Omron Blood Pressure Monitor doesn't inflate, it might be due to several reasons: * The [START/STOP] button was accidentally pressed without the cuff being applied. Press the [START/STOP] button again to turn the monitor off. Then, securely insert the air plug and correctly apply the arm cuff before pressing the button again. * The air plug isn't fully inserted. Make sure to insert the air plug securely. * The arm cuff isn't correctly positioned. Apply the arm cuff correctly before taking another measurement. * There's an air leak in the cuff. If air is leaking, replace the arm cuff with a new one.
R
Rachel GreenAug 25, 2025
What to do if Omron M7 Intelli IT Blood Pressure Monitor displays or the arm cuff does not inflate?
- J
  josephmcneilAug 26, 2025
  This issue may occur due to several reasons: 1. The [START/STOP] button was pressed before the arm cuff was applied. Press the [START/STOP] button again to turn the monitor off, then after correctly applying the arm cuff and inserting the air plug, press the [START/STOP] button. 2. The air plug is not fully inserted. Ensure the air plug is securely inserted. 3. The arm cuff is not correctly applied. Apply the arm cuff correctly, then take another measurement. 4. There is an air leak from the arm cuff. Replace the arm cuff with a new one.
K
Kathy TateAug 26, 2025
Why does Omron M7 Intelli IT Blood Pressure Monitor display or a measurement cannot be completed after the arm cuff inflates?
- J
  juan69Aug 26, 2025
  This can occur because you moved or talked during the measurement, or the arm cuff did not inflate sufficiently. Remain still and do not talk during measurements. If "E2" appears repeatedly, manually inflate the arm cuff until the systolic pressure is 30 to 40 mmHg above your previous readings. This can also happen if your systolic pressure is above 210 mmHg.
M
Mark BaileySep 12, 2025
What does mean on my Omron M7 Intelli IT?
- F
  Felicia BlackSep 12, 2025
  If your Omron Blood Pressure Monitor displays , it indicates that the pulse rate wasn't detected correctly. Make sure to apply the arm cuff correctly and remain still and sit correctly during the measurement. If the symbol continues to appear, it's recommended to consult with your physician.
L
Linda SmithSep 14, 2025
Why does my Omron M7 Intelli IT Blood Pressure Monitor display ?
- J
  Joseph WeaverSep 14, 2025
  If your Omron Blood Pressure Monitor displays , it means the battery polarities are not properly aligned. Check the battery installation to ensure correct placement.
J
jillian15Sep 4, 2025
What to do for other problems with Omron M7 Intelli IT?
- D
  Dr. Michael JacksonSep 5, 2025
  For other problems with your Omron Blood Pressure Monitor, first, press the [START/STOP] button and repeat the measurement. If the issue continues, replace the batteries with new ones. If the problem still persists, contact your OMRON retail outlet or distributor.
A
Amber AndersonSep 5, 2025
What to do if the batteries are low on Omron M7 Intelli IT?
- M
  Melanie PorterSep 5, 2025
  It is recommended to replace the 4 batteries in your Omron Blood Pressure Monitor with new ones.
D
David GuzmanAug 31, 2025
Why is the measurement result extremely high or low on my Omron M7 Intelli IT Blood Pressure Monitor?
- A
  Adam RushAug 31, 2025
  An extremely high or low measurement result on your Omron Blood Pressure Monitor could be due to several factors: the arm cuff being applied too loosely, movement or talking during measurement, or clothing interfering with the arm cuff. Make sure the arm cuff is applied tighter, remain still and do not talk during measurement, and remove any clothing interfering with the arm cuff.
E
ericksontonyaAug 30, 2025
What to do if irregular heartbeat is detected on Omron Blood Pressure Monitor?
- E
  Emily MartinezAug 30, 2025
  If your Omron Blood Pressure Monitor detects an irregular heartbeat, remove the arm cuff, wait 2-3 minutes, and take another measurement, repeating the steps as instructed. If the error persists, it is recommended to contact your physician.

Omron M7 Intelli IT Specifications

General

Type	Automatic
Cuff size	22 - 42 cm
Compatibility	iPhone, Android
Product color	Black, Grey, White
Number of users	2 user(s)
Placement supported	Upper arm
Mean arterial pressure	Yes
Diastolic blood pressure	-
Package weight	1380 g