3. Using Your Monitor without a Smart Device
EN28
Using the Afib Mode
Afib indicator function
In the Afib mode, the monitor automatically takes 3 consecutive
readings at 30-second intervals and displays the average. If there is a
possibility of Afib, the “ ” symbol will appear.
This is not the diagnosis, it is only a potential finding for Afib.
You should contact your physician to discuss the findings.
If you are experiencing any symptoms, contact a medical
professional.
1. Select your user ID.
2. Press and hold the [START/STOP] button for
more than 2 seconds.
3. Release the [START/STOP]
button when “ ” appears
on the display.
The arm cuff starts to inflate automatically.
After the first measurement is complete, wait for the next
measurement to start.
The 30-second interval counter will appear on the display.
INFLATINGSTART DEFLATING COUNTDOWN
2895901-4A_HEM-7361T-ALRU_IM.fm Page 28 Wednesday, October 26, 2022 10:46 AM
To Next Page
Loading...
