EN29
3. Using Your Monitor without a Smart Device
After the second measurement is complete, wait for the next
measurement to start.
The 30-second interval counter will appear on the display.
After the third measurement is complete, the average for the 3
measurements appears on the display. If Afib is detected, the
“ ” symbol will appear.
• If error symbol “ ” appears, follow the instructions in
section 7.
To view readings in Afib measurement, refer to sub-section
5.1.
INFLATINGSTART DEFLATING COUNTDOWN
INFLATINGSTART DEFLATING COUNTDOWNCOMPLETED
2895901-4A_HEM-7361T-ALRU_IM.fm Page 29 Wednesday, October 26, 2022 10:46 AM
To Next Page
Loading...
