4. Using Your Monitor with a Smart Device
EN32
5. Press the [START/STOP] button to turn your
monitor off.
• If the “Err” symbol appears, follow the instructions in the
“OMRON connect” app.
• Your monitor automatically turns off after 2 minutes.
• Be aware that OMRON will not be responsible for the loss of
data and/or information in the app.
• “OMRON connect” is the only app that we recommend to
use with your monitor to transfer data correctly.
4.2 Taking a Measurement
Refer to sub-section 3.1 to start a measurement. Open the app on
your smart device and follow the instructions.
•If your profile has been registered, once the [START/STOP] button
is pressed, your birthday is displayed and the user ID symbol
flashes twice.
•Profile registration is available on the “OMRON connect” app. Refer
to sub-section 4.1.
•Make sure that your monitor is within 5 m of your smart device.
Transferring Data Automatically/Manually
•When Bluetooth is enabled, the readings will be transferred to your
smart device within 1 hour after taking a measurement.
•To transfer the readings manually, press the button.
2895901-4A_HEM-7361T-ALRU_IM.fm Page 32 Wednesday, October 26, 2022 10:46 AM
To Next Page
Loading...
