Omron M7 Intelli IT - Using Your Monitor without a Smart Device; Taking a Measurement

EN26
EN
3. Using Your Monitor without a Smart Device
3.1 Taking a Measurement
You can use your monitor without pairing to a smart device. To pair
your monitor with a smart device, refer to sub-section 4.1.
Note
•To stop the measurement, press the [START/STOP] button once to
deflate the arm cuff.
Caution
• DO NOT use this monitor with other medical electrical (ME) equipment
simultaneously. This may result in incorrect operation of the devices and/or
cause an inaccurate reading.
• Remain still and DO NOT talk while taking a measurement.
1. Press the [START/STOP] button.
All symbols appear on the display before starting the
measurement.
2. Remain still and do not talk until the entire
measurement process is complete.
The “ ” symbol flashes at every heartbeat.
Note
• The “ ” symbol appears if the arm cuff is wrapped around
the arm correctly.
• When the “ ” symbol is displayed, the arm cuff is not
applied correctly. Press the [START/STOP] button to turn
your monitor off, then apply the cuff correctly.
2895901-4A_HEM-7361T-ALRU_IM.fm Page 26 Wednesday, October 26, 2022 10:46 AM