EN19
2. Preparation
2.2 Using the AC Adapter
•Make sure not to place your monitor in a location where it is difficult
to plug and unplug the AC adapter.
•We recommend keeping batteries in your monitor at all times, even
if you choose to use the AC adapter. If only the AC adapter is used
without keeping batteries in your monitor, you may need to reset the
date and time each time you unplug and plug back the AC adapter.
The readings will not be deleted.
1. Insert the AC adapter plug into the AC adapter
jack on the right side of your monitor.
2. Plug the AC adapter into an electrical outlet.
To unplug the AC adapter, unplug the AC adapter from the
electrical outlet and then remove the AC adapter plug from
the monitor.
• ONLY use the AC adapter, arm cuff, batteries and accessories specified for
this monitor. Use of unsupported AC adapters, arm cuffs and batteries may
damage and/or may be hazardous to this monitor.
2895901-4A_HEM-7361T-ALRU_IM.fm Page 19 Wednesday, October 26, 2022 10:46 AM
To Next Page
Loading...
