EN49
8. Maintenance
3. Place your monitor and other components in
the storage case.
Do not store your monitor and other components:
To protect your monitor during storage, an optional LCD cover is
available as accessory. Refer to section 9.
8.3 Cleaning
•Do not use any abrasive or volatile cleaners.
•Use a soft dry cloth or a soft cloth moistened with mild (neutral)
detergent to clean your monitor and arm cuff and then wipe them
with a dry cloth.
•Do not wash or immerse your monitor and arm cuff or other
components in water.
•Do not use gasoline, thinners or similar solvents to clean your
monitor and arm cuff or other components.
8.4 Calibration and Service
•The accuracy of this blood pressure monitor has been carefully
tested and is designed for a long service life.
•It is generally recommended to have the unit inspected every two
years to ensure correct functioning and accuracy. Please consult
your authorised OMRON dealer or the OMRON Customer Service
at the address given on the packaging or attached literature.
•If your monitor and other components are wet.
•In locations exposed to extreme temperatures, humidity, direct
sunlight, dust or corrosive vapors such as bleach.
•In locations exposed to vibrations or shocks.
2895901-4A_HEM-7361T-ALRU_IM.fm Page 49 Wednesday, October 26, 2022 10:46 AM
To Next Page
Loading...
