EasyManua.ls Logo

Omron JPN710T - 5. Specifications

Omron JPN710T
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
5. Specifications
Note
These specifications are subject to change without notice.
This monitor is clinically investigated according to the requirements of ISO
81060-2:2013. In the clinical validation study, K5 was used on 85 subjects for
determination of diastolic blood pressure.
IP classification is degrees of protection provided by enclosures in accordance
with IEC 60529. This monitor and optional AC adapter are protected against
solid foreign objects of 12.5 mm diameter and greater such as a finger. The
optional AC adapter is protected against oblique falling water drops which
may cause issues during a normal operation.
Product description OMRON Automatic Blood Pressure
Monitor
Model JPN710T
Display LCD digital display
Cuff pressure range 0 to 299 mmHg
Blood pressure
measurement range
SYS: 60 to 260 mmHg
DIA: 40 to 215 mmHg
Pulse measurement range
40 to 180 beats / min.
Accuracy Pressure: ±3 mmHg
Pulse: ±5% of display reading
Inflation Automatic by electric pump
Deflation Automatic pressure release valve
Measurement method Oscillometric method
Transmission method
Bluetooth
®
Low Energy
Wireless communication Frequency range: 2.4 GHz (2400 -
2483.5 MHz) / Modulation: GFSK
Effective radiated power: < 20 dBm
Operation mode Continuous operation
IP classification Monitor: IP20
Optional AC adapter: IP21
Rating DC6 V 4.0 W
Maximum temperature of
the applied part
Lower than +43°C
Power source
4 “AA” batteries 1.5 V or optional
AC adapter (INPUT AC 100 - 240 V
50 - 60 Hz 0.12 - 0.065 A)
Battery life Approximately 1000 measurements
(using new alkaline batteries)
Durable period (Service
life)
Monitor: 5 years / Cuff: 5 years /
Optional AC adapter: 5 years
Operating conditions +10 to +40°C / 15 to 90% RH (non-
condensing) / 800 to 1060 hPa
Storage / Transport
conditions
-20 to +60°C / 10 to 90% RH (non-
condensing)
Weight Monitor: approximately 460 g (not
including batteries)
Arm cuff: approximately 163 g
Dimensions
(approximately value)
Monitor: 191 mm (W) × 85 mm (H) ×
120 mm (L) / Arm cuff:145 mm ×
532 mm (air tube: 750 mm)
Cuff circumference
applicable to the monitor
220 to 420 mm
Memory Stores up to 100 readings per user
Contents Monitor, arm cuff (HEM-FL31), 4 “AA”
batteries, Instruction Manual and
, setup instructions, storage case
Protection against electric
shock
Internally powered ME equipment
(When using only batteries)
Class II ME equipment (Optional AC
adapter)
Applied part Type BF (arm cuff )

Related product manuals