Omron MicroHAWK ID-40 - Important Global Variables

Important Global Variables
Global Variable Data Type Used For Notes
ID40_Input01 S_ID40_Input_type_103 EtherNet/IP ID-40 Reader 1
ID40_Input02 S_ID40_Input_type_103 EtherNet/IP ID-40 Reader 2
ID40_Input03 S_ID40_Input_type_103 EtherNet/IP ID-40 Reader 3
ID40_Input04 S_ID40_Input_type_103 EtherNet/IP ID-40 Reader 4
ID40_Input05 S_ID40_Input_type_103 EtherNet/IP ID-40 Reader 5
ID40_Input06 S_ID40_Input_type_103 EtherNet/IP ID-40 Reader 6
ID40_Output01 S_ID40_Output_type_197 EtherNet/IP ID-40 Reader 1
ID40_Output02 S_ID40_Output_type_197 EtherNet/IP ID-40 Reader 2
ID40_Output03 S_ID40_Output_type_197 EtherNet/IP ID-40 Reader 3
ID40_Output04 S_ID40_Output_type_197 EtherNet/IP ID-40 Reader 4
ID40_Output05 S_ID40_Output_type_197 EtherNet/IP ID-40 Reader 5
ID40_Output06 S_ID40_Output_type_197 EtherNet/IP ID-40 Reader 6
Input_Bit_00 BOOL Map to Digital Input Bit 00 Trigger Read
Input_Bit_01 BOOL Map to Digital Input Bit 01
Reset (Clears counters, stops read cycle,
puts readers online)
Output_Bit_00 BOOL Map to Digital Output Bit 00 Data Valid
Output_Bit_04 BOOL Map to Digital Output Bit 04 Decode Status (TRUE on Good Read)
DecodeStatus BOOL N/A Decode Status (TRUE on Good Read)
Decode_FullResults S_ID40_Input_type_103 N/A
Storage of all results from ID-40 that
read the barcode
DecodeStr STRING[436] N/A Storage of Read String
TrigCount UDINT Counter Trigger Count
ReadCount UDINT Counter Successful Read Count
OverrunCount UDINT Counter
Overrun Count (read cycle not completed
when next trigger was received)
ReadTime LINT Time (In Milliseconds) Reports time from trigger to result
HMI_ReadTimeout LINT Time (In Milliseconds)
Maximum time to attempt decode, Initial
value set to 2,000 milliseconds
36
Technical Note: MicroHAWK ID-40 360
º
Barcode Reading Solution
TECHNICAL
NOTE
Appendix B