Need help?Do you have a question about the Omron FQ-CR2 and is the answer not in the manual?
General| Brand | Omron |
|---|---|
| Model | FQ-CR2 |
| Category | Barcode Reader |
| Language | English |
Provides instructions for physically installing the Sensor and Touch Finder.
Explains how to connect the Sensor and Touch Finder via wiring.
Guides on configuring Ethernet network settings for the device.
Details how to optimize image quality settings like focus and brightness.
Outlines the basic steps for setting up inspection parameters.
Details how to add, modify, or delete inspection items.
Explains how to configure settings specifically for 2D code inspections.
Describes how to conduct test measurements to verify settings.
Details the process of saving configuration settings to the Sensor's memory.
Explains how to initiate the device's operational (Run) mode.
Explains parallel control and output methods.
Details Ethernet-based output and control methods.
Lists common errors, their causes, and suggested solutions.
To Next Page
