Omron FQ-CR2 User Manual

Outputting/Controlling with Ethernet
FQ-CR2 User’s Manual
131
8
Communications with External Devices
End Continuous Measurements
The command ends continuous measurements.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
Set the Ethernet output to output measurement results.
If Ethernet output is not set, only the command response is output.
Reference: Setting the Data to Output via Ethernet (p. 120)
A S M E CR U R E / E
Delimiter
CR M/E
Delimiter
or
CR SC
Delimiter
or
CR OK
Delimiter
CR
Measurement
result
CR OK
CR
Delimiter
Measurement
result
Data returned
for the number
of continuous
measurements
made.
Note
FQ Sensor User Manual.book 131 ページ ２０１１年７月８日 金曜日 午後２時３０分

Omron FQ-CR2 Specifications

General

Brand	Omron
Model	FQ-CR2
Category	Barcode Reader
Language	English