Omron FQ-CR2 - Acquires the Brightness

Outputting/Controlling with Ethernet
FQ-CR2 User’s Manual
137
8
Communications with External Devices
Acquire Brightness
This command acquires the sensor brightness.
This command is only valid when the HDR function is ON.
● BRIGHTNESS or BN
<Command Format>
<Response Format>
When the command is processed normally
When the command is not processed normally
<Parameter Description>
Brightness The brightness is output as a value from 1 to 100.
B R CR IGHT ES
S
N
or
Delimiter Delimiter
CR NB
CR O K
Delimiter
Brightness (max. 3 digits)
Space
(0x20)
Space
(0x20)
CR ER
Delimiter
Sec8.fm 137 ページ ２０１１年７月８日 金曜日 午後４時３１分