Outputting/Controlling with Ethernet
134
FQ-CR2 User’s Manual
Set Shutter Time
This command sets the shutter time.
This command is only valid when the HDR function is OFF.
● LASERTIME or LT
<Command Format>
<Response Format>
When the command is processed normally
When the command is not processed normally
<Parameter Description>
Shutter time Sets the exposure time in units of 0.01 ms. Enter a 4-digit value.
LA IME
CR
SE TR
Shutter time (4 digits)
Shutter time (4 digits)
Delimiter
or
TL
CR
Delimiter
Space
(0×20)
FQ Sensor User Manual.book 134 ページ 2011年7月8日 金曜日 午後2時30分