4
Setting Up Inspections
Configuring Inspection Items
FQ-CR2 User’s Manual
47
4-2 Configuring Inspection Items
Adding New Inspection Items
1 Press [Inspect] − [Inspection].
2 Press an unused inspection item number.
3 Press [Add item.] on the menu.
4 The Settings tab appears.
When registering multiple inspection items, press the
inspection item number after 1.--- and set it in the
same way.
If more than six inspection items are set, drag the icon at the bottom of the menu up to display the next inspec-
tion item numbers.
Note
FQ Sensor User Manual.book 47 ページ 2011年7月8日 金曜日 午後2時30分