Omron FQ-CR2 - Acquires the Sensor Model

Outputting/Controlling with Ethernet
FQ-CR2 User’s Manual
145
8
Communications with External Devices
Acquire Sensor Model
This command acquires the Sensor model.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Model Returns the model.
Example: When the model is FQ-CR20100F-M, the response is FQ-CR20100F-M.
VE /H CR RG TE
ParameterCommand
Space
(0×20)
Delimiter
F Q 1 0 M-F0 CR - C 2 0R
Delimiter
Model
CR OK
Delimiter
CR ER
Delimiter
FQ Sensor User Manual.book 145 ページ ２０１１年７月８日 金曜日 午後２時３０分