Omron FQ-CR2 - Scene_Number; Acquires the Current Scene

Outputting/Controlling with Ethernet
FQ-CR2 User’s Manual
127
8
Communications with External Devices
Command Details
Scene Control Commands
● SCENE or S or SN
Acquire Scene Number
This command acquires the scene number currently being used.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Example:
When Scene 0 Is Being Used
<Command>
<Response>
Scene number The acquired scene number (currently used scene number) is returned.
S C CR E N E
Delimiter
CR S
Delimiter
CR S N
Delimiter
or or
CR
CR
OK
Delimiter
Delimiter
Scene number
(2 digits max.)
CR ER
Delimiter
SC CR E N E
0 CR
KO CR
FQ Sensor User Manual.book 127 ページ ２０１１年７月８日 金曜日 午後２時３０分