Outputting/Controlling with Ethernet
118
FQ-CR2 User’s Manual
8-2 Outputting/Controlling with Ethernet
Data can be input and output to external devices via Ethernet. The two methods are described below.
• No-protocol Data Output
Data that is already specified for output is automatically output from the Sensor to Ethernet when an overall
judgement result is output. Up to 32 data can be output in the specified format (ASCII format or binary format).
• No-protocol Command/Response Method
The external device sends a command to the Sensor and receives a response from the Sensor.
External device
Sensor
Data
Up to 32 specified data
are automatically output.
External device Sensor
OK
NG
Etc.
Response
Switch the scene number.
Execute one measurement.
Etc.
Command
FQ Sensor User Manual.book 118 ページ ２０１１年７月８日 金曜日 午後２時３０分
To Next Page
Loading...
