Omron FQ-CR2 User Manual

Outputting/Controlling with Ethernet
150
FQ-CR2 User’s Manual
● RESET
Restarts the Sensor.
This command restarts the Sensor.
<Command Format>
<Response Format>
When the Command Is Processed Normally
If process is completed normally, the Sensor is restarted. There is therefore no response.
When the Command Is Not Processed Normally
RE CR SET
Command
Delimiter
CR ER
Delimiter
FQ Sensor User Manual.book 150 ページ ２０１１年７月８日 金曜日 午後２時３０分

Omron FQ-CR2 Specifications

General

Brand	Omron
Model	FQ-CR2
Category	Barcode Reader
Language	English