Omron FQ-CR2 - Acquires the Shutter Time

Outputting/Controlling with Ethernet
FQ-CR2 User’s Manual
133
8
Communications with External Devices
Acquire Shutter Time
This command acquires the shutter time.
This command is only valid when the HDR function is OFF.
● LASERTIME or LT
<Command Format>
<Response Format>
When the command is processed normally
When the command is not processed normally
<Parameter Description>
Exposure time The exposure time is output as a 4 digit value in units of 1/100 ms.
Example: When the exposure time is 5.47 ms
OK 0547
LA CR SERT MEI
or
Delimiter Delimiter
CR TL
CR O K
Delimiter
Shutter time (4 digits)
Space
(0x20)
CR ER
Delimiter
FQ Sensor User Manual.book 133 ページ ２０１１年７月８日 金曜日 午後２時３０分