Omron FQ-CR2 - Sets the Brightness

Outputting/Controlling with Ethernet
138
FQ-CR2 User’s Manual
Set Brightness
This command sets the sensor brightness.
This command is only valid when the HDR function is ON.
● BRIGHTNESS or BN
<Command Format>
<Response Format>
When the command is processed normally
When the command is not processed normally
<Parameter Description>
Brightness Sets the brightness as a value from 1 to 100.
BR N ESS CR IG TH
Brightness (max. 3 digits)
Brightness (max. 3 digits)
Space
(0×20)
Delimiter
or
NB CR
Delimiter
Space
(0×20)
Space
(0×20)
CR OK
Delimiter
CR ER
Delimiter
Sec8.fm 138 ページ ２０１１年７月８日 金曜日 午後４時３１分