Omron FQ-CR2 - Sets the Gain

Outputting/Controlling with Ethernet
136
FQ-CR2 User’s Manual
Set Gain
Sets the sensor gain.
This command is only valid when the HDR function is OFF.
● GAIN or GN
<Command Format>
<Response Format>
When the command is processed normally
When the command is not processed normally
<Parameter Description>
Gain Specifies the gain within the range 16 to 64.
GA CR I N
Gain (max. 2 digits)
Gain (max. 2 digits)
Space
(0×20)
or
NG CR

Delimiter
Delimiter
Space
(0×20)
CR OK
Delimiter
CR ER
Delimiter
Sec8.fm 136 ページ ２０１１年７月８日 金曜日 午後４時３１分